Netgear WNAP320 Guia do Utilizador descarregar pdf (Página 91)

Chapter 5. Advanced Configuration | 91

ProSafe Wireless-N Access Point WNAP320 Reference Manual

For example, first configure security profile NETGEAR-WDS-1 with the MAC address

of AP2, and then configure security profile NETGEAR-WDS-2 with the MAC address

of AP3 (see Figure 54 on p

age 88).

2. Activate the wireless access

point (AP1 on LAN Segment 1 in Figure 54 on page 88) as

a point-to-multipoint bridge (that is, it is the master in the wireless network):

a. On th

e Bridging screen, select the Enable Wireless Bridging check box.

b. Select

the Wireless Point-to-Multi-Point Bridge radio button.

c. Select the Ena

ble Wireless Client Association check box to enable wireless client

association.

Note: If you do not select the Enable Wireless Client Association check

box, the wireless access point will not function in point-to-multipoint

bridge but in repeater mode.

d. If the correct profile names and security options are displayed in the table, select the

check boxes in the Enable column for all security profiles that you want to enable.

e. Click Apply in th

e Bridging screen to activate your point-to-multipoint bridge

settings.

3. Conf

igure AP2 on LAN Segment 2 (see Figure 54 on page 88) in point-to-point bridge mode

with the remote MAC address of AP1.

4. Conf

igure AP3 on LAN Segment 3 (see Figure 54 on page 88) in point-to-point bridge mode

with the remote MAC address of AP1.

5. V

erify the following for all wireless access points:

• On

ly AP1 on LAN Segment 1 is configured in point-to-multipoint bridge mode, and all

others APs are configured in point-to-point bridge mode.

• AP2

and AP3 (the point-to-point APs) must have AP1’s MAC address in their Remote

MAC Address field.

• All APs must be

on the same LAN, that is, the LAN IP addresses of all APs must be in

the same network as the LAN devices.

• If you use DHCP

, all wireless access points must obtain an IP address automatically

(as a DHCP client). For more information, see Configure IP Settings and Optional

DHCP Server Settings on page 21.

• All wireless a

ccess points must use the same channel, authentication mode, and

security settings.

6. V

erify connectivity across the LANs:

• A compute

r on any LAN segment should be able to connect to the Internet or share

files and printers with any other PCs or servers connected to any of the three LAN

segments.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 125 126

Comentários a estes Manuais

Sem comentários

Netgear WNAP320 Guia do Utilizador Página 91

Comentários a estes Manuais

Manuais e produtos relacionados com Pontos de acesso WLAN Netgear WNAP320