Netgear PS100 Manual do Utilizador descarregar pdf (Página 110)

NetGear Print Server Manual

101

Protocol computers. The factory default is enable.

TCP/IP Tab

This tab allows configuration for the TCP/IP network protocol.. For further information about TCP/IP,

refer to Chapter

Figure 8-5 TCP/IP Tab Window

TCP/IP Tab Fields

Field Description

DHCP This field allows you to enable or disable the print server's ability to get its IP address from a DHCP

(Dynamic Host Configuration Protocol) server. When disabled, you can provide a fixed IP address in the

following fields.

IP Address This IP address is assigned to the print server. If you have a private LAN and do not plan to connect to the

TCP/IP-based internet, NETGEAR recommends that you use the address from the IETP-designated

private addresses (for example, 192.168.x.x or 10.x.x.x).

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 141 142

Sem comentários

Netgear PS100 Manual do Utilizador Página 110