Netgear PS111W Manual do Utilizador descarregar pdf (Página 78)

NetGear Print Server Manual

System Tab Window

System Tab Fields

Field Description

Device

Name

Choose a descriptive name for the router for identification purposes (for example, EngPrsv). This name is

used in all protocols to identify the specific print server. There is a factory default name. For any change,

NETGEAR recommends that a name be determined before setting the print server in any network. This

name should be no more than 16 characters with at least a non numeric letter. Spaces are not allowed, but

dashes (-) and underscore marks (_) are accepted.

IPX/SPX

Protocol

Choose to enable or disable the IPX/SPX protocol used in the NetWare environment. This selection is

always shadowed to indicate that the IPX/SPX protocol is always active and cannot be disabled.

TCP/IP

Protocol

Choose to enable or disable the TCP/IP protocol. TCP/IP is used for UNIX networking and Microsoft

networking. The factory default is Enable.

NetBEUI

Protocol

Choose to enable or disable the NetBEUI protocol. NetBEUI is primarily used in a small-scale Microsoft

networking environment.

leTalk Choose to enable or disable the A

leTalk Protocol. A

leTalk is used in small networks of A

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 105 106

Sem comentários

Netgear PS111W Manual do Utilizador Página 78