Netgear WN802T Manual do Utilizador descarregar pdf (Página 26)

RangeMax NEXT Wireless-N Access Point WN802T Reference Manual

2-8 Installation and Configuration

v1.0, August 2007

2. From the Country/Region pull-down menu, select the region where the WN802T can be used

(the Country/Region is not Configurable in the United States; but is configurable in the rest of

the world).

3. Configure the Wireless LAN settings based on the following field descriptions:

• Turn Radio On. On by default, you can also turn off the radio to disable access through

this device. This can be helpful for configuration, network tuning, or troubleshooting

activities.

• Wireless Network Name (SSID). Enter a 32-character (maximum) service set ID in this

field; the characters are case sensitive. When the wireless access point is deployed in

“infrastructure” mode, the SSID assigned to a wireless device must match the wireless

access point SSID in order for the wireless device to communicate with the WN802T. If

they do not match, you will not get a wireless connection to the WN802T. The default is

NETGEAR.

• Broadcast Wireless Network Name (SSID). If Enabled, the Wireless Access Point

broadcasts its SSID allowing Wireless Stations which have a “null” (blank) SSID to adopt

the correct SSID. If set to disable, the SSID is not broadcast. The default is Enabled.

• Wireless Mode. From the pull-down menu, select the desired wireless operating mode:

–

11b/g – Both 802.11b and 802.11g wireless stations can be used.

Figure 2-4

Note: If your country or region is not listed, please check with your local government

agency.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 77 78

Sem comentários

Netgear WN802T Manual do Utilizador Página 26