Reference Manual for the ADSL Firewall Router DG834
7-14 Virtual Private Networking (Advanced Feature)
202-10005-05, June 2005
• In this example, type 192.168.3.1 in the Subnet field as the network address of the DG834.
•Enter 255.255.255.0 in the Mask field as the LAN Subnet Mask of the DG834.
• Select All in the Protocol menu to allow all traffic through the VPN tunnel.
• Select the Connect using Secure Gateway Tunnel check box.
• Select IP Address in the ID Type menu below the check box.
• Enter the public WAN IP Address of the DG834 in the field directly below the ID Type
menu. In this example,
22.23.24.25 would be used.
• The resulting Connection Settings are shown in Figure 7-10.
3. Configure the Security Policy in the NETGEAR ProSafe VPN Client software.
• In the Network Security Policy list, expand the new connection by double clicking its
name or clicking on the “+” symbol. My Identity and Security Policy subheadings appear
below the connection name.
• Click on the Security Policy subheading to show the Security Policy menu.
Figure 7-11: Security Policy Editor Security Policy
• Select the Main Mode in the Select Phase 1 Negotiation Mode check box.
4. Configure the VPN Client Identity.
In this step, you will provide information about the remote VPN client PC. You will need to
provide:
— The Pre-Shared Key that you configured in the DG834.
— Either a fixed IP address or a “fixed virtual” IP address of the VPN client PC.
Comentários a estes Manuais