Netgear WC9500 Manual do Utilizador descarregar pdf (Página 16)

Introduction

ProSAFE Wireless Controller WC9500

Back Panel Features

The wireless controller comes with a single internal power supply but supports an optional

second power supply for power redundancy. The power supplies are hot-swappable.

The following figure shows the back panel of the wireless controller with a single internal

power supply, the power supply connector, and two double fans.

Power supply connector

Slot for an optional

second power supply

Figure 3. Back panel

Status LED

(continued)

Off The wireless controller is not receiving power.

Blinking yellow Firmware is being upgraded.

Fan LED Green The fans are functioning correctly.

Yellow One or more fans are not functioning correctly.

Stack Master

LED

Green The wireless controller is functioning as the master controller in a stack.

Yellow The wireless controller is functioning as a slave controller in a stack.

SFP slot LEDs Green The slot is operating at 10G.

Blinking green Data is being transmitted or received at 10G.

Yellow The slot is operating at 1G.

Blinking yellow Data is being transmitted or received at 1G.

Left Ethernet

port LED

Off The port is not connected to a powered-on Ethernet device (see Ethernet

Port LEDs Are Not Lit on page 338).

Green The port detected a link with a connected Ethernet device.

Blinking green Data is being transmitted or received.

Right Ethernet

port LED

Off The port is not connected to a powered-on Ethernet device (see Ethernet

Port LEDs Are Not Lit on page 338).

Green The port is operating at 1000 Mbps.

Yellow The port is operating at 100 Mbps or 10 Mbps.

Table 1. LED functions (continued)

LED Status Description

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 356 357

Sem comentários

Netgear WC9500 Manual do Utilizador Página 16