Netgear WNA1000 Guia do Utilizador descarregar pdf (Página 39)

NETGEAR Wireless-N 150 USB Adapter WNA1000 User Manual

2-15

v1.0, August 2009

Setting Up WPA-PSK [TKIP] or WPA2-PSK [AES] Security

To configure WPA-PSK security:

1. Run the WNA1000 Smart Wizard.

a. Make sure that the WNA1000 software is installed and the wireless-N USB adapter is

fully inserted in a USB port in your computer.

b. Use the icon to open the Smart Wizard. The Settings tab displays.

2. Configure the Security settings.

a. In the Profile field, select the profile, or type in a profile name.

b. In the Network Name (SSID) field, and then select the network, or enter the SSID.

c. In the Security section, select WPA-PSK [TKIP] or WPA2-PSK [AES], and enter the

passphrase.

For more about WPA2-PSK, see the link to “Wireless Communications:” in Appendix B.

3. Save your settings in a profile.

a. Click the Save Profile button. All the configuration settings are saved in this profile.

b. Click Apply, and then click Close to exit the Smart Wizard.

Note: You will not get a wireless network connection unless the network SSID

matches exactly what is configured in the access point.

Figure 2-12

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 57 58

Sem comentários

Netgear WNA1000 Guia do Utilizador Página 39