Netgear GS724TS-100NAS Manual do Utilizador descarregar pdf (Página 254)

254 | Appendix B: Configuration Examples

GS716Tv2 and GS724Tv3 Software Administration Manual

departments. Traffic from the Finance department is identified by each packet’s network IP

address.

1. From the IP ACL screen, create a new IP ACL with an IP ACL ID of 1 (See IP ACL on

page 190).

2. From the IP Rules screen, create a rule for IP ACL 1 with the following settings:

• Rule ID: 1

• Action: Deny

• Assign Queue ID: 0 (optional: 0 is the default value)

• Match Every: False

• Source IP Address: 192.168.187.0

• Source IP Mask: 255.255.255.0

For additional information about IP ACL rules, see IP Rules on page 191.

3. Click Add.

4. From the IP Rules screen, create a second rule for IP ACL 1 with the following settings:

• Rule ID: 2

• Action: Permit

• Match Every: True

5. Click Add.

6. From the IP Binding Configuration page, assign ACL ID 1 to the interface gigabit ports 2, 3,

and 4, and assign a sequence number of 1 (See IP Binding Configuration on page 196).

By default, this IP ACL is bound on the inbound direction, so it examines traffic as it

enters the switch.

7. Click Apply.

8. Use the IP Binding Table screen to view the interfaces and IP ACL binding information (See

IP Binding Table on page 198).

The IP ACL in this example matches all packets with the source IP address and subnet mask

of the Finance department's network and deny it on the Ethernet interfaces 2, 3, and 4 of the

switch. The second rule permits all non-Finance traffic on the ports. The second rule is

required because there is an explicit deny all rule as the lowest priority rule.

1 2 ... 249 250 251 252 253 254 255 256 257 258 259 ... 274 275

Sem comentários

Netgear GS724TS-100NAS Manual do Utilizador Página 254