Netgear GS728TP Manual do Utilizador descarregar pdf (Página 140)

100

101

Configuring Switching Information

140

ProSafe M5300 Switch

To configure global iSCSI settings:

1. In the iSCSI Status field, either Enable or Disable iSCSI optimization on the switch. The

default is Disable.

2. In the QoS Profile field, select the quality of service profile that will be applied to iSCSI

flows.

• VLAN Priority Tag

• DSCP

By default, iSCSI flows are assigned to the highest VPT/DSCP mapped to the highest

queue not used for stack management or voice VLAN. Be sure to configure the relevant

Class of Service parameters for the queue in order to complete the setting.

Setting the VPT/DSCP sets the QoS profile which determines the egress queue to which

the frame is mapped. The switch default setting for egress queues scheduling is

Weighted Round Robin (WRR). You can complete the QoS setting by configuring the

relevant ports to work in other scheduling and queue management modes via the Class

of Service settings.

3. If using VLAN Priority as the QoS profile, use the VLAN Priority Tag field to assign a VLAN

Priority value to iSCSI session packets.

4. If using DSCP as the QoS profile, use the DSCP field to assign a DSCP value to iSCSI

session packets.

5. If using DSCP as the QoS profile, specify whether to enable or disable the Remark mode.

The default is Disable.

Enabling Remark allows the packets to be updated with IEEE 802.1p or IP-DSCP values.

Remarking packets with priority data provides special QoS treatment as the packets

continue through the network.

6. In the iSCSI Aging Time field, set the number of minutes a session can be inactive prior to

removal.

7. Click APPLY to update the switch with the changes.

8. Click CANCEL to abandon the changes.

1 2 ... 135 136 137 138 139 140 141 142 143 144 145 ... 529 530

Comentários a estes Manuais

Sem comentários

Netgear GS728TP Manual do Utilizador Página 140

Comentários a estes Manuais

Manuais e produtos relacionados com Software Netgear GS728TP