Netgear XSM7224S Manual do Utilizador Página 109

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 579
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 108
ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0
Switching Commands 3-68
v1.0, November 2010
no dot1x max-req
This command sets the maximum number of times the authenticator state machine on this port will
transmit an EAPOL EAP Request/Identity frame before timing out the supplicant.
dot1x max-users
Use this command to set the maximum number of clients supported on the port when MAC-based
dot1x authentication is enabled on the port. The maximum users supported per port is dependent
on the product. The <count> value is in the range 1 - 16.
no dot1x max-users
This command resets the maximum number of clients allowed per port to its default value.
dot1x port-control
This command sets the authentication mode to use on the specified port. Select force-
unauthorized to specify that the authenticator PAE unconditionally sets the controlled port to
unauthorized. Select force-authorized to specify that the authenticator PAE unconditionally
sets the controlled port to authorized. Select auto to specify that the authenticator PAE sets the
Format dot1x max-req <count>
Mode Interface Config
Format no dot1x max-req
Mode Interface Config
Default 16
Format dot1x max-users
<count>
Mode Interface Config
Format no dot1x max-req
Mode Interface Config
Vista de página 108
1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 578 579

Comentários a estes Manuais

Sem comentários