Netgear HE102 Manual do Utilizador descarregar pdf (Página 23)

Wireless LAN Configuration Parameters

CONFIGURATION DESCRIPTION

SSID (Service Set ID)

Enter a 32-character (maximum) service set ID in this field; the

characters are case sensitive. When in infrastructure mode, this field

defines the service set ID (SSID). The SSID assigned to the wireless

node is required to match the access point SSID in order for the wireless

node to communicate with the access point.

Default: Wireless

System Name

The unique name represents the access point.

Default:

Channel/Frequency

Shows the current channel and frequency in use. The wireless channel

in use will be between 36 and 64 or 42, 48, 54 with turbo mode enabled.

Default: 52(non-turbo), 42 (Turbo)

Turbo Mode

Enabling turbo mode allows the wireless node to transmit or receive at a

higher rate, up to 72 Mbps.

Default: Disable

Data Rate

Shows the available transmit data rate of the wireless network. The

possible data rates supported are: 54 Mbps, 48 Mbps, 36 Mbps, 24

Mbps, 18 Mbps, 12 Mbps, 9 Mbps, and 6 Mbps. It can go up to 72 Mbps

if the turbo mode is enabled.

Default: Best

Transmit Power

Set the transmit signal strength of the HE102. The options are

“full”, ”half”, “quarter”, “eighth”, “and “min”. Decrease the transmit power

if more than one AP is co-located using the same channel frequency.

Default: Full

Beacon Interval

Specifies the Beacon Interval value. Enter a value in between 20 to

1000.

Default: 100

DTIM

The Delivery Traffic Indication Message. Speechifies the data beacon

rate between 1 and 16384.

Default: 1

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31

Sem comentários

Netgear HE102 Manual do Utilizador Página 23