Netgear WN804 Guia do Utilizador descarregar pdf (Página 30)

Advanced Configuration

WN804 Access Point

Advanced Wireless Settings

You can use this screen to turn the wireless radio on and off, to specify WPS settings, to use

AP mode, and to set up a wireless access list.

The Fragmentation Length, CTS/RTS Threshold, and Preamble Mode options in this screen

are reserved for wireless testing and advanced configuration only. Do not change these

settings unless you have a specific reason to do so.

Control the Wireless Radio

By default, the wireless radio is enabled so that you can connect wirelessly to the access

point. You can turn the wireless radio on or off in the Advanced Wireless Settings screen or

by using the WiFi On/Off button on the access point front panel. When the wireless radio is

off, you can still use an Ethernet cable for a LAN connection to the access point.

 To turn the wireless radio on or off:

1. Select Advanced Setup > W

ireless Settings.

By default, the Enable Wireless AP Radio check box is selected.

2. Select or clear the Enable W

ireless AP Radio check box.

If you clear this check box, this turns off the WiFi feature of the wireless access point.

3. (Optional) Select the T

urn off wireless signal by schedule check box and fill in the fields

to specify the times when you do not need a wireless connection.

For example, you could turn off the wireless signal for the weekend if you leave town.

4. Click Apply.

Your changes take effect.

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 45 46

Sem comentários

Netgear WN804 Guia do Utilizador Página 30