Netgear WNAP210 Manual do Utilizador Página 54
- Página / 82
- Índice
- RESOLUÇÃO DE PROBLEMAS
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
Advanced Configuration
54
ProSafe Wireless-N Access Point WNAP210
5. Configure the other access point (AP 2) on LAN Segment 2 in point-to-point bridge mode.
AP 1 needs to have AP 2’s MAC address in its Remote MAC Address field, and AP 2
needs to have AP 1’s MAC address in its Remote MAC Address field.
6. Configure and verify the following parameters for both access points:
• Verify that both access points are configured to operate in the same LAN network
address range as the LAN devices.
• Both use the same ESSID, channel, authentication mode, if any, and security
settings.
7. Verify connectivity across LAN 1 and LAN 2.
A computer on either LAN segment should be able to connect to the Internet or share files
and printers of any other computers or servers connected to LAN Segment 1 or LAN
Segment 2.
8. Click Apply to save your settings.
Point-to-Multi-Point Wireless Bridge
LAN Segment 3
LAN Segment 1
Hub or switch
AP 3
AP 1
Router
APs in point-to-multi-point bridge mode
Hub or switch
AP 2
LAN Segment 2
Figure 4. Point-to-multi-point-bridge mode
- ProSafe Wireless-N Access 1
- Point WNAP210 1
- Technical Support 2
- Trademarks 2
- Statement of Conditions 2
- Contents 3
- Getting Started 5
- System Requirements 6
- What Is In the Box 6
- Hardware Description 7
- Rear Panel 8
- Connect to the Access Point 11
- Log In to the Access Point 11
- Configure LAN Settings 12
- Set Basic IP Options 13
- IP Settings Fields 14
- Basic Wireless Setting Fields 16
- MCS Index/Data Rate 17
- Guard Interval 17
- Channel/Frequency 17
- QoS Settings 18
- Deploy the Access Point 18
- Wall Mount Kit (Optional) 19
- Wireless Security Options 20
- Security Profiles 21
- Data Encryption 23
- VLAN ID 23
- RADIUS Server Settings 24
- WEP Security 28
- Management 31
- Change the Password 32
- Remote Management 32
- Remote Console 34
- To upgrade the firmware: 35
- ,and click Save 36
- Enable the Syslog Server 37
- Restore Defaults 37
- Monitoring 39
- System Information 40
- Wireless Stations 41
- Enable Rogue AP Detection 41
- View and Save AP Lists 43
- Activity Log 44
- Network Traffic Statistics 44
- Advanced Configuration 46
- 802.1Q VLAN 47
- Hotspot Settings 48
- Advanced Wireless Settings 48
- Advanced QoS Settings 50
- Wireless Bridge 51
- Point-to-Point Bridge 53
- Wireless Repeater 56
- Client Mode 57
- Troubleshooting and Debugging 58
- Troubleshooting with the LEDs 59
- • Try again 61
- Supplemental Information 62
- Factory Default Settings 63
- Technical Specifications 65
- Command Line Reference 66
- Notification of Compliance 75
- FCC Information to User 77
- FCC Declaration of Conformity 77
- FCC Caution 77
- Interference Reduction Table 79
Manuais e produtos relacionados com Pontos de acesso WLAN Netgear WNAP210
(69 páginas)Acura 2013 MDX - Advanced Technology Guide (Base) manuels
Manuels d'utilisation et guides de l'utilisateur pour Voitures Acura 2013 MDX - Advanced Technology Guide (Base).
Nous fournissons des manuels en pdf 1 Acura 2013 MDX - Advanced Technology Guide (Base) à télécharger gratuitement par type de document : Manuel de l'utilisateur
Comentários a estes Manuais