Netgear XSM7224S Manual do Utilizador descarregar pdf (Página 112)

100

101

ProSafe XSM7224S Managed Stackable Switch CLI Manual, Software Version 9.0

Switching Commands 3-71

v1.0, November 2010

no dot1x system-auth-control

This command is used to disable the dot1x authentication support on the switch.

dot1x timeout

This command sets the value, in seconds, of the timer used by the authenticator state machine on

this port. Depending on the token used and the value (in seconds) passed, various timeout

configurable parameters are set. The following tokens are supported:

Default disabled

Format dot1x system-auth-control

Mode Global Config

Format no dot1x system-auth-control

Mode Global Config

Tokens Definition

guest-vlan-

period

The time, in seconds, for which the authenticator waits to see if any EAPOL packets are

received on a port before authorizing the port and placing the port in the guest vlan (if

configured). The guest vlan timer is only relevant when guest vlan has been configured

on that specific port.

reauth-period The value, in seconds, of the timer used by the authenticator state machine on this port

to determine when re-authentication of the supplicant takes place. The reauth-period

must be a value in the range 1 - 65535.

quiet-period The value, in seconds, of the timer used by the authenticator state machine on this port

to define periods of time in which it will not attempt to acquire a supplicant. The quiet-

period must be a value in the range 0 - 65535.

tx-period The value, in seconds, of the timer used by the authenticator state machine on this port

to determine when to send an EAPOL EAP Request/Identity frame to the supplicant. The

quiet-period must be a value in the range 1 - 65535.

supp-timeout The value, in seconds, of the timer used by the authenticator state machine on this port

to timeout the supplicant. The supp-timeout must be a value in the range 1 - 65535.

server-timeout The value, in seconds, of the timer used by the authenticator state machine on this port

to timeout the authentication server. The supp-timeout must be a value in the range 1 -

65535.

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 578 579

Comentários a estes Manuais

Sem comentários

Netgear XSM7224S Manual do Utilizador Página 112

Comentários a estes Manuais

Manuais e produtos relacionados com Software Netgear XSM7224S