Netgear WNAP320 Guia do Utilizador descarregar pdf (Página 42)

42 | Chapter 3. Wireless Configuration and Security

ProSafe Wireless-N Access Point WNAP320 Reference Manual

Network Authentication

and

Data Encryption

(continued)

WPA2-PSK Select this only if all clients sup

port WPA2. If selected, you

must use AES and TKIP + AES encryption and enter a

WPA passphrase (network key).

See Configure WPA-PSK, WPA2-PSK, and WP

A-PSK &

WPA2-PSK on page 46.

WPA-PSK and

A2-PSK

Select this setting to allow clients to use either WPA (with

TKIP) or WPA2 (with AES). If selected, you must use TKIP

+ AES encryption and enter a WPA passphrase (network

key).

See Configure WPA-PSK, WPA2-PSK, and WP

A-PSK &

WPA2-PSK on page 46.

Wireless Client Security

Sep

aration

If you enable wireless client security separation by selecting Enable from the

drop-down list, the associated wireless clients are not be able to communicate

with each other. By default, Disable is selected from the drop-down list. This

feature is intended for hotspots and other public access situations.

Dynamic VLAN From the drop-down list, select how VLANs

operate by making one of the

following selections:

• Dis

able. Disables dynamic VLANs, and enables static VLANs. This is the

default setting.

• Op

tional. Enables dynamic VLANs but if a RADIUS server does not return a

VLAN ID, the wireless station is still allowed to connect to the wireless access

point.

• Require

d. Enables dynamic VLANs. If a RADIUS server does not return a

VLAN ID, the wireless station is not authenticated and cannot connect to the

wireless access point.

For dynamic VLANs to operate (that is, the sele

ction is Optional or Required),

the following is required:

• The hubs and switches on your L

AN must support the VLAN (802.1Q)

standard.

• The authentication is set to any RADIUS

type authentication: either the

network authentication in the wireless security profile or the remote MAC

address database authentication for the MAC Authentication feature can be

used.

VLAN ID Enter the default VLAN ID that must be associated with this wireless

security

profile. The default VLAN ID is 1. The VLAN ID must match the VLAN ID that is

used by the other devices in your network.

Table 9. Authentication Settings of the Edit Security Profile Screen (Continued)

Field Description

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 125 126

Comentários a estes Manuais

Sem comentários

Netgear WNAP320 Guia do Utilizador Página 42

Comentários a estes Manuais

Manuais e produtos relacionados com Pontos de acesso WLAN Netgear WNAP320