Netgear Switch M4100 Manual do Utilizador descarregar pdf (Página 125)

100

101

Chapter 7. OSPF | 125

ProSafe M4100 and M7100 Managed Switches

a. Select Routing > IPv6 > Advanced > IP Interface Configuration.

A screen similar to the following displays.

b. Scroll down and select the interface 1/0/1 check box. Now 1/0/1 appears in the

Interface field at the top.

c. Enter the following information:

• In the IPv6 Mode field, select Enable.

• In the Routing Mode field, select Enable.

d. Click Apply to save the settings.

4. Assign the IP address 2001::1 to port 1/0/1.

a. Select Routing > IPv6 >

Advanced > IP Interface Configuration.

A screen similar to the following displays.

b. Under IPv6 Prefix Selection, in the Interface list, select 1/0/1.

c. Under IPv6 Interface Configuration, enter the following information:

• In the IPv6 Prefix field, enter 2001::1.

• In the Length field, enter 64.

• In the EUI64 field, select Disable.

• In the the Onlink Flag field, select Disable.

• In the Autonomous Flag field, select Disable.

d. Click Add to save the settings.

5. Enable OSPFv3 on port 1/0/1.

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 558 559

Comentários a estes Manuais

Sem comentários

Netgear Switch M4100 Manual do Utilizador Página 125

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Netgear Switch M4100