Netgear Switch M4100 Manual do Utilizador descarregar pdf (Página 92)

100

101

92 | Chapter 7. OSPF

ProSafe M4100 and M7100 Managed Switches

Now 1/0/3 appears in the Interface field at the top.

• In the OSPF Area

ID field, enter 0.0.0.3.

• In the OSPF Admin

Mode field, select Enable.

• In the Priority field, enter 255.

• In the Metric Cost field, enter 64.

c. Click Apply to save the settings.

OSPF on a Border Router

The example is shown as CLI commands and as a Web interface procedure. For an OSPF

sample network, see Figure 11 on page 87.

CLI: Configure OSPF on a Border Router

1. Enable routing for the switch.

(Netgear Switch) #config

(Netgear Switch) (Config)#ip routing

2. Enable routing and assign IPs for ports 1/0/2, 1/0/3, and 1/0/4.

(Netgear Switch) (Config)#interface 1/0/2

(Netgear Switch) (Interface 1/0/2)#routing

(Netgear Switch) (Interface 1/0/2)#ip address 192.150.2.2 255.255.255.0

(Netgear Switch) (Interface 1/0/2)#exit

(Netgear Switch) (Config)#interface 1/0/3

(Netgear Switch) (Interface 1/0/3)#routing

(Netgear Switch) (Interface 1/0/3)#ip address 192.130.3.1 255.255.255.0

(Netgear Switch) (Interface 1/0/3)#exit

(Netgear Switch) (Config)#interface 1/0/4

(Netgear Switch) (Interface 1/0/4)#routing

(Netgear Switch) (Interface 1/0/4)#ip address 192.64.4.1 255.255.255.0

(Netgear Switch) (Interface 1/0/4)#exit

3. Specify the router ID, and enable OSPF for the switch.

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 558 559

Comentários a estes Manuais

Sem comentários

Netgear Switch M4100 Manual do Utilizador Página 92

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Netgear Switch M4100