Netgear Switch M4100 Manual do Utilizador descarregar pdf (Página 161)

100

101

Chapter 10. ACLs | 161

ProSafe M4100 and M7100 Managed Switches

9. Deny all traffic with the destination IP address 192.168.48.0/24, and permit all other traffic.

(Netgear Switch) (Config)#interface 1/0/24

(Netgear Switch) (Interface 1/0/24)#ip access-group 102 in 1

(Netgear Switch) (Interface 1/0/24)#ip access-group 103 in 2

(Netgear Switch) (Interface 1/0/24)#exit

10. Deny all traffic with the destination IP address 192.168.24.0/24, and permit all other traffic.

(Netgear Switch) (Config)#interface 1/0/48

(Netgear Switch) (Interface 1/0/48)#ip access-group 101 in 1

(Netgear Switch) (Interface 1/0/48)#ip access-group 103 in 2

(Netgear Switch) (Interface 1/0/48)#exit

Web Interface: Configure One-Way Access Using a TCP Flag in

an ACL

1. Create VLAN 24 with IP address 192.168.24.1.

a. Select Routing > VLAN > VLAN Routing W

izard. A screen similar to the following

displays.

b. Enter the following information:

• In the Vlan ID field, enter 24.

• In the IP Address field, enter 192.168.24.1.

• In the Network Mask field, enter 255.255.255.0.

c. Click Unit 1.

The ports display.

d. Click the gray box under port 24 twice until U displays.

The U specifies that the egress packet is untagged for the port.

e. Click Apply to save VLAN 24.

2. Create VLAN 48 with IP address 192.168.48.1.

1 2 ... 156 157 158 159 160 161 162 163 164 165 166 ... 558 559

Comentários a estes Manuais

Sem comentários

Netgear Switch M4100 Manual do Utilizador Página 161

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Netgear Switch M4100