Netgear Switch M4100 Manual do Utilizador descarregar pdf (Página 169)

100

101

Chapter 10. ACLs | 169

ProSafe M4100 and M7100 Managed Switches

b. Under Binding Configuration, make the following selection and enter the following

information:

• In he ACL ID field, select 101.

• In the Sequence Number field, enter 1.

c. Click Unit 1.

The ports display.

d. Click the gray box under port 48.

A check mark displays in the box.

e. Click Apply to save the settings.

13. Apply

ACL 103 to port 24 and port 48:

a. Select Security >

ACL > Advanced > IP Binding Configuration.

A screen similar to the following displays.

b. Under Binding Configuration, make the following selection and enter the following

information:

• In the ACL ID field, select 103.

• In the Sequence Number field, enter 2.

c. Click Unit 1.

The ports display.

Configure the following ports:

• Click the gray box under port 24.

A check mark displays in the box.

• Click the gray box under port 48.

A check mark displays in the box.

d. Click Apply to save the settings.

Set up a MAC ACL with Two Rules

The example is shown as CLI commands and as a Web interface procedure.

1 2 ... 164 165 166 167 168 169 170 171 172 173 174 ... 558 559

Comentários a estes Manuais

Sem comentários

Netgear Switch M4100 Manual do Utilizador Página 169

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Netgear Switch M4100