Netgear UTM5 Manual do Utilizador Página 414
- Página / 484
- Índice
- MARCADORES
Avaliado. / 5. Com base em avaliações de clientes
ProSecure Unified Threat Management (UTM) Appliance Reference Manual
12-4 Troubleshooting and Using Online Support
v1.0, January 2010
• If your UTM’s IP address has been changed and you do not know the current IP address, clear
the UTM’s configuration to factory defaults. This sets the UTM’s IP address to 192.168.1.1.
This procedure is explained in “Restoring the Default Configuration and Password” on
page 12-9.
• Make sure that you are using the SSL https://address login rather than the http://address login.
• Make sure that your browser has Java, JavaScript, or ActiveX enabled. If you are using
Internet Explorer, click Refresh to be sure that the Java applet is loaded.
• Try quitting the browser and launching it again.
• Make sure that you are using the correct login information. The factory default login name is
admin and the password is password. Make sure that Caps Lock is off when entering this
information.
If the UTM does not save changes you have made in the Web Configuration Interface, check the
following:
• When entering configuration settings, be sure to click the Apply button before moving to
another menu or tab, or your changes are lost.
• Click the Refresh or Reload button in the Web browser. The changes might have occurred, but
the Web browser might be caching the old configuration.
When You Enter a URL or IP Address a Time-out Error
Occurs
A number of things could be causing this situation. Try the following troubleshooting steps.
• Check whether other computers on the LAN work properly. If they do, ensure that your
computer’s TCP/IP settings are correct. If you use a fixed (static) IP address, check the subnet
mask, default gateway, DNS, and IP addresses on the WAN1 ISP Settings or WAN2 ISP
Settings screen of the dual-WAN port models, or on the WAN ISP Settings screen of the
single-WAN port models (see “Manually Configuring the Internet Connection” on page 3-5).
Tip: If you do not want to revert to the factory default settings and lose your
configuration settings, you can reboot the UTM and use a sniffer to capture
packets sent during the reboot. Look at the ARP packets to locate the UTM’s
LAN interface address.
- ProSecure Unified Threat 1
- Management (UTM) 1
- Appliance Reference Manual 1
- Additional Copyrights 3
- Contents 7
- About This Manual 17
- How to Print This Manual 18
- Revision History 18
- Chapter 1 19
- Introduction 19
- Key Features and Capabilities 20
- Outbound Load Balancing 21
- A Powerful, True Firewall 22
- Security Features 23
- Extensive Protocol Support 24
- Maintenance and Support 25
- Model Comparison 25
- 1-8 Introduction 26
- Figure 1-1 26
- Package Contents 27
- Hardware Features 28
- Introduction 1-11 29
- Table 1-2. LED Descriptions 29
- Rear Panel 30
- Introduction 1-13 31
- Figure 1-4 31
- Figure 1-5 31
- 1-14 Introduction 32
- Figure 1-6 32
- Using the Rack-Mounting Kit 33
- 1-16 Introduction 34
- Chapter 2 35
- Your Network 35
- Logging In to the UTM 36
- Figure 2-1 37
- Figure 2-2 38
- Figure 2-4 40
- Figure 2-5 40
- Figure 2-6 41
- Figure 2-7 42
- Figure 2-8 45
- Figure 2-9 48
- Figure 2-10 50
- Figure 2-11 52
- Figure 2-12 53
- Figure 2-13 55
- Figure 2-15 58
- Verifying Proper Installation 60
- Figure 2-17 61
- What to Do Next 62
- Chapter 3 63
- Figure 3-1 65
- Figure 3-2 65
- Figure 3-3 66
- Setting the UTM’s MAC Address 67
- Figure 3-4 68
- Figure 3-5 68
- Models Only) 71
- WAN Mode screen displays 74
- Figure 3-9 77
- Figure 3-10 80
- Configuring Dynamic DNS 81
- Figure 3-11 82
- Figure 3-12: 83
- Figure 3-13 84
- Chapter 4 87
- LAN Configuration 87
- 4-2 LAN Configuration 88
- LAN Configuration 4-3 89
- Figure 4-1 89
- VLAN DHCP Options 90
- LAN Configuration 4-5 91
- Configuring a VLAN Profile 92
- LAN Configuration 4-7 93
- Figure 4-3 93
- 4-8 LAN Configuration 94
- LAN Configuration 4-9 95
- 4-10 LAN Configuration 96
- LAN Configuration 4-11 97
- Figure 4-4 97
- 4-12 LAN Configuration 98
- Managing the Network Database 99
- 4-14 LAN Configuration 100
- Figure 4-5 100
- LAN Configuration 4-15 101
- 4-16 LAN Configuration 102
- Figure 4-6 102
- Figure 4-7 103
- LAN Configuration 4-17 103
- 4-18 LAN Configuration 104
- LAN Configuration 4-19 105
- Figure 4-8 105
- 4-20 LAN Configuration 106
- Table 4-3. DMZ Setup Settings 106
- LAN Configuration 4-21 107
- Managing Routing 108
- Configuring Static Routes 109
- 4-24 LAN Configuration 110
- To enable and configure RIP: 111
- 4-26 LAN Configuration 112
- Static Route Example 113
- 4-28 LAN Configuration 114
- Chapter 5 115
- Firewall Protection 115
- Administrator Tips 116
- Services-Based Rules 117
- 5-4 Firewall Protection 118
- Firewall Protection 5-5 119
- 5-6 Firewall Protection 120
- Firewall Protection 5-7 121
- 5-8 Firewall Protection 122
- Firewall Protection 5-9 123
- 5-10 Firewall Protection 124
- Order of Precedence for Rules 125
- Setting LAN WAN Rules 126
- Firewall Protection 5-13 127
- 5-14 Firewall Protection 128
- Figure 5-3 128
- Setting DMZ WAN Rules 129
- 5-16 Firewall Protection 130
- Figure 5-5 130
- Firewall Protection 5-17 131
- Figure 5-6 131
- 5-18 Firewall Protection 132
- Figure 5-7 132
- Setting LAN DMZ Rules 133
- 5-20 Firewall Protection 134
- Figure 5-9 134
- Firewall Protection 5-21 135
- Figure 5-10 135
- Inbound Rules Examples 136
- Firewall Protection 5-23 137
- Figure 5-12 137
- 5-24 Firewall Protection 138
- Figure 5-13 138
- Firewall Protection 5-25 139
- Outbound Rules Example 140
- Attack Checks 141
- 5-28 Firewall Protection 142
- Figure 5-16 142
- Firewall Protection 5-29 143
- Setting Session Limits 144
- Firewall Protection 5-31 145
- Adding Customized Services 146
- Firewall Protection 5-33 147
- Figure 5-19 147
- 5-34 Firewall Protection 148
- Table 5-6. Services Settings 148
- Figure 5-20 148
- Firewall Protection 5-35 149
- 5-36 Firewall Protection 150
- Figure 5-21 150
- Figure 5-22 150
- Firewall Protection 5-37 151
- Creating Bandwidth Profiles 152
- Profile screen displays 153
- 5-40 Firewall Protection 154
- Firewall Protection 5-41 155
- Figure 5-25 155
- Enabling Source MAC Filtering 156
- Firewall Protection 5-43 157
- Figure 5-26 157
- Setting up IP/MAC Bindings 158
- Firewall Protection 5-45 159
- Figure 5-27 159
- Configuring Port Triggering 160
- Firewall Protection 5-47 161
- Figure 5-28 161
- 5-48 Firewall Protection 162
- Figure 5-29 162
- Firewall Protection 5-49 163
- Figure 5-30 163
- 5-50 Firewall Protection 164
- Firewall Protection 5-51 165
- Figure 5-31 165
- 5-52 Firewall Protection 166
- Chapter 6 167
- Configuring E-mail Protection 169
- Figure 6-1 170
- Figure 6-2 171
- E-mail Content Filtering 174
- Figure 6-3 175
- Figure 6-4 179
- Figure 6-5 181
- Figure 6-6 183
- Figure 6-7 186
- Configuring Web Malware Scans 187
- Figure 6-8 188
- Configuring Web URL Filtering 196
- Figure 6-12 197
- HTTPS Scan Settings 200
- Figure 6-14 201
- Figure 6-15 202
- Specifying Trusted Hosts 203
- Figure 6-16 204
- Configuring FTP Scans 205
- Figure 6-17 206
- Table 6-12. FTP Scan Settings 206
- Figure 6-18 208
- Figure 6-19 208
- Setting Scanning Exclusions 210
- Figure 6-20 211
- Chapter 7 213
- Virtual Private Networking 213
- Using IPsec Connections 213
- Configurations 215
- Figure 7-3 216
- Figure 7-4 217
- Figure 7-5 218
- Figure 7-6 220
- Figure 7-7 220
- Figure 7-8 221
- Figure 7-9 222
- Figure 7-10 224
- Figure 7-11 225
- Figure 7-12 225
- Editor menu 226
- Figure 7-13 227
- Testing the VPN Connection 229
- Figure 7-15 230
- Figure 7-16 231
- Figure 7-17 231
- Figure 7-18 232
- Viewing the UTM IPsec VPN Log 233
- Managing IPsec VPN Policies 234
- Managing IKE Policies 235
- Figure 7-20 236
- Figure 7-21 238
- Managing VPN Policies 243
- Figure 7-22 244
- Figure 7-23 246
- User Database Configuration 252
- RADIUS Client Configuration 252
- Figure 7-24 253
- Mode Config Operation 255
- Figure 7-25 256
- Figure 7-26 257
- UTM’s default LAN subnet is 258
- Figure 7-27 259
- Figure 7-28 263
- Figure 7-29 265
- Configuring Keepalives 268
- Figure 7-32 270
- Figure 7-33 271
- Chapter 8 273
- Using SSL Connections 273
- Figure 8-1 274
- Figure 8-2 275
- Figure 8-4 279
- Figure 8-5 281
- Settings 282
- Figure 8-6 283
- Figure 8-7 285
- Figure 8-8 287
- Figure 8-9 287
- Viewing the UTM SSL VPN Log 288
- Figure 8-11 289
- Creating the Portal Layout 290
- Figure 8-12 291
- Figure 8-13 292
- Figure 8-14 295
- Figure 8-15 298
- Figure 8-16 301
- Figure 8-18 305
- Chapter 9 311
- Configuring Domains 312
- Figure 9-1 313
- Figure 9-2 314
- Figure 9-3 317
- Configuring User Accounts 319
- Figure 9-5 320
- Figure 9-6 321
- Table 9-4. Add User Settings 321
- Setting User Login Policies 322
- Figure 9-8 323
- Figure 9-9 325
- Figure 9-10 326
- Managing Digital Certificates 327
- Managing CA Certificates 329
- Managing Self Certificates 330
- Figure 9-12 331
- Table 9-7 332
- Requests table 333
- Figure 9-14 334
- Chapter 10 337
- Network and System Management 337
- Features That Reduce Traffic 338
- System Management 345
- Figure 10-1 346
- Figure 10-2 346
- Figure 10-3 348
- Using an SNMP Manager 350
- Table 10-1. SNMP Settings 351
- Figure 10-5 352
- Updating the Firmware 354
- Figure 10-6 355
- Figure 10-7 358
- Figure 10-8 360
- Chapter 11 363
- Figure 11-1 364
- Figure 11-2 366
- Figure 11-3 367
- Figure 11-4 369
- Figure 11-5 373
- Table 11-4. Alerts Settings 373
- Figure 11-6 375
- Information 378
- Viewing Status Screens 382
- Port section 384
- Viewing Active VPN Users 386
- Figure 11-14 387
- Figure 11-15 388
- Figure 11-16 388
- Viewing the WAN Ports Status 389
- Figure 11-18 390
- Figure 11-19 390
- Status Informations 391
- Figure 11-20 392
- Figure 11-21 392
- Querying the Logs 394
- Figure 11-23 396
- Figure 11-24 403
- Figure 11-25 404
- Using Diagnostics Utilities 405
- Chapter 12 411
- Basic Functioning 412
- LAN or WAN Port LEDs Not On 413
- Figure 12-1 419
- Problems with Date and Time 420
- Using Online Support 420
- Figure 12-2 421
- Figure 12-3 422
- Appendix A 423
- Appendix B 427
- (Dual-WAN Port Models Only) 427
- Figure B-2 432
- Inbound Traffic 433
- Figure B-4 434
- Figure B-5 434
- Figure B-6 435
- Figure B-7 436
- Figure B-8 436
- Figure B-9 437
- Figure B-10 438
- Figure B-11 438
- VPN Gateway-to-Gateway 439
- Figure B-13 440
- Figure B-14 440
- Figure B-15 441
- Figure B-16 441
- Figure B-17 442
- Figure B-18 443
- Figure B-19 443
- Figure B-20 444
- Appendix C 445
- System Log Messages 446
- Service Logs 447
- Login/Logout 448
- Firewall Restart 448
- IPsec Restart 448
- WAN Status 449
- Load-Balancing Mode 450
- PPP Logs 451
- • PPPoE Idle-Timeout Logs 451
- • PPTP Idle-Timeout Logs 452
- • PPP Authentication Logs 452
- Traffic Metering Logs 453
- Unicast Logs 453
- Invalid Packet Logging 454
- Spam Logs 457
- Traffic Logs 458
- Virus Logs 458
- E-mail Filter Logs 458
- IPS Logs 459
- Port Scan Logs 459
- Routing Logs 460
- WAN to LAN Logs 461
- DMZ to LAN Logs 461
- WAN to DMZ Logs 461
- Appendix D 463
- Two Factor Authentication 463
- D-2 Two Factor Authentication 464
- Two Factor Authentication D-3 465
- Figure D-1 465
- Figure D-2 465
- D-4 Two Factor Authentication 466
- Figure D-3 466
- Appendix E 467
- Related Documents 467
- E-2 Related Documents 468
- Numerics 469
- Index-10 478
- Index-11 479
- Index-12 480
- Index-13 481
- Index-14 482
- Index-15 483
- Index-16 484
Manuais e produtos relacionados com Routers Netgear UTM5
Routers Netgear R7000-100PAS Ficha Técnica
(6 páginas)
(6 páginas)
Routers Netgear R6250-100GRS Ficha Técnica
(5 páginas)
(5 páginas)
Routers Netgear WNDR37AV-100NAS Ficha Técnica
(3 páginas)
(3 páginas)
Routers Netgear WNDRMAC-100NAS Ficha Técnica
(2 páginas)
(2 páginas)
Routers Netgear RP114 Ficha Técnica
(154 páginas)
(154 páginas)
Routers Netgear FVS124GNA Ficha Técnica
(2 páginas)
(2 páginas)
Routers Netgear AC750 Manual do Utilizador
(159 páginas)
(159 páginas)
Routers Netgear R6220 Manual do Utilizador
(160 páginas)
(160 páginas)
Routers Netgear D6100 Manual do Utilizador
(221 páginas)
(221 páginas)
Routers Netgear MR814FS Ficha Técnica
(2 páginas)
(2 páginas)
Routers Netgear D3600-100UKS Manual do Utilizador
(202 páginas)
(202 páginas)
Routers Netgear WNR2000-200UKS Manual do Utilizador
(113 páginas)
(113 páginas)
Routers Netgear EX7000 Manual do Utilizador
(76 páginas)
(76 páginas)
Routers Netgear AC1600 Manual do Utilizador
(292 páginas)
(292 páginas)
Routers Netgear D500 Guia de Instalação
(2 páginas)
(2 páginas)
Routers Netgear D7000 Manual do Utilizador
(22 páginas)
(22 páginas)
Routers Netgear R8000 Manual do Utilizador
(174 páginas)
(174 páginas)
Routers Netgear WGT624FS Ficha Técnica
(2 páginas)
(2 páginas)
Routers Netgear R6100 Manual do Utilizador
(122 páginas)
(122 páginas)
Routers Netgear EX6200 Manual do Utilizador
(124 páginas)
(124 páginas)
© 2020, manymanuals-pt.com. Todos os direitos reservados. | 0.028 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais