Netgear Switch M4100 Manual do Utilizador descarregar pdf (Página 399)

100

101

Chapter 24. Double VLANs and Private VLAN Groups | 399

ProSafe M4100 and M7100 Managed Switches

The following example shows how to configure the NETGEAR switch shown in the preceding

figure to add a double VLAN tag for traffic going from the subnet domain connected to port

1/0/24. This example assumes there is a Layer 2 switch connecting all these devices in your

domain. The Layer 2 switch tags the packet going to the NETGEAR switch port 1/0/24. The

example is shown as CLI commands and as a Web interface procedure.

CLI: Enable a Double VLAN

Create a VLAN 200.

(Netgear Switch)#vlan database

(Netgear Switch) (Vlan)#vlan 200

(Netgear Switch) (Vlan)#exit

Add interface 1/0/24 to VLAN 200, add pvid 200 to port.

(Netgear Switch) #config

(Netgear Switch) (Config)#interface 1/0/24

(Netgear Switch) (Interface 1/0/24)#vlan pvid 200

(Netgear Switch) (Interface 1/0/24)#vlan participation include 200

(Netgear Switch) (Interface 1/0/24)#exit

Add interface 1/0/48 to the VLAN 200 in a tagging mode.

(Netgear Switch) (Config)#interface 1/0/48

(Netgear Switch) (Interface 1/0/48)#vlan participation include 200

(Netgear Switch) (Interface 1/0/48)#vlan tagging 200

(Netgear Switch) (Interface 1/0/48)#exit

Select interface 1/0/48 as the provider port.

(Netgear Switch) (Config)#

(Netgear Switch) (Config)#interface 1/0/48

(Netgear Switch) (Interface 1/0/48)#mode dvlan-tunnel

(Netgear Switch) (Interface 1/0/48)#exit

Web Interface: Enable a Double VLAN

1. Create static VLAN 200:

1 2 ... 394 395 396 397 398 399 400 401 402 403 404 ... 558 559

Comentários a estes Manuais

Sem comentários

Netgear Switch M4100 Manual do Utilizador Página 399

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Netgear Switch M4100