Netgear Switch M4100 Manual do Utilizador descarregar pdf (Página 85)

100

101

Chapter 6. RIP | 85

ProSafe M4100 and M7100 Managed Switches

• In the Network Mask field, enter 255.255.255.0.

c. Click Unit 1.

The ports display.

d. Click the gray box under port 3 until T displays.

The T specifies that the egress packet is tagged for the port.

e. Click Apply to save the VLAN that includes port 3.

3. Enable RIP on the switch (you can skip this step since the RIP is enabled by default).

a. Select Routing > RIP > Basic > RIP Configuration.

A screen similar to the following displays.

b. For RIP Admin Mode, select the Enable radio button.

c. Click Apply to save the setting.

4. Enable RIP on VLANs 10 and 20.

a. Select Routing > RIP >

Advanced > RIP Configuration.

A screen similar to the following displays.

b. Enter the following information:

• In the Interface list, select 0/2/1.

• For RIP Admin Mode, select the Enable radio button.

c. Click Apply to save the settings.

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 558 559

Comentários a estes Manuais

Sem comentários

Netgear Switch M4100 Manual do Utilizador Página 85

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Netgear Switch M4100